Shaft Rotor Shaft Assembly Shaft & Rotor Assembly machine This new semi-automatic machine will be used for Pressing the shaft into rotor as per requirement and spot facing, center drilling, drilling, reaming, cleaning the hole and pin pressing into hole the process sequence of this requirement • Shaft pressing into Rotor – The operator loads the rotor and shaft, and after part detection, pressing begins, with load confirmation displayed. • Shaft rotor height checking gauge – The operator checks the part's height, and the machine confirms with a green light. • Part loading at SPM – The operator loads the part, and after orientation and mix-up checks, the machine indexes to the next station. • Spot facing Operation – The tool performs spot facing under servo control, coolant is applied, and a sensor checks tool condition. • Center Drilling Operation – The center drilling tool operates under servo control, with coolant applied and tool condition monitored. • Drilling Operation – Drilling is servo-controlled with coolant, and a sensor checks tool condition after each cycle. • Reaming Operation – Reaming is servo-controlled with coolant, and tool condition is checked by a sensor after each cycle. • Cleaning of hole – Air pipes clean the reamed hole by blowing out chips and coolant. • Pin Pressing – The pin is pressed into the hole, with load monitoring, and the part moves to the next station after confirmation. • Pin height checking and unloading – Pin height is checked, and the part is unloaded using a pneumatic magnet after confirmation.

Submersible Pump Shaft Key way Milling Machine | Iyalia We, Iyalia, are located in Coimbatore, HUB of Submersible Pump Manufacturing. We accepted a "MAKING THEIR LIFE EASIER" challenge by designing a machine for Keyway Milling Submersible PUMP CENTRE Shafts where quality is 100% and ZERO Rejection. Centre Shaft has Two Keyways on 180Deg of shaft width from 3 mm and goes on as per the shaft Dia. The Shaft Dia and the length can vary from 300 to 3000mm. Production must be quick and consistent, without any significant human resources involved. Production output will be 700 to 1000 mm/minute. with the minimum workforce.

SPM Tube End Thickening Machine A Tube-expanding hydraulic Press with two cylinders is a specialized Machine designed for the R and D of the TATA Group. The purpose of this machine is to expand the ends of tubes from INSIDE; this is a special customized requirement. Two cylinders operate by applying hydraulic force to expand the diameter of the tube's end. It features two high-pressure hydraulic cylinders that work in tandem to exert uniform pressure on the tube, causing it to expand radially. One of the key features of this machine is its customization. It can be tailored to meet the specific needs of various industries and applications. This customization may include adjustments to the tube diameter range, The Tube Expanding Hydraulic Press incorporates safety features such as emergency stop buttons, protective guards, and pressure relief valves to ensure the well-being of operators and the longevity of the equipment.

Multi SpindleTapping Machine We are leading manufacturer of tapping machine for single head tapping machine, multi head tapping machine. we are provided good quality of raw material used in this all type of special purpose machines. What is an SPM Tapping Machine?SPM, or Special Purpose Machines, are designed for specific tasks, offering a level of specialization that general machines can't match. The SPM Tapping Machine, as the name suggests, is designed for tapping – a process where internal threads are cut into a hole. These machines can range from single-spindle versions to multi-spindle ones, catering to different production needs. The Power of Servo Controls One of the standout features of our SPM Tapping Machines is the integration of Servo controls. But why is this significant? Precision: Servo controls offer unparalleled precision. The ability to control the machine's speed and position ensures that every tap is consistent and accurate. Flexibility: With Servo controls, operators can easily adjust the machine's parameters, allowing for a wide range of tapping requirements. Efficiency: Servo-driven machines consume power only when needed, leading to energy savings. Types of SPM Tapping Machines High-Speed Tapping Machines: As the name suggests, these machines are designed for operations that require rapid tapping. They are ideal for large-scale production where time is of the essence. Automatic Tapping Machines: These machines are designed for automated operations. Once set, they can operate without much human intervention, ensuring consistent results and high productivity. Multi-hole with Single Components for Multi-tapping: This is a versatile machine designed for multi-tapping tasks. It can tap multiple holes in a single component simultaneously, drastically reducing production time. Single-spindle vs. Multi-spindle Tapping Machines Single-spindle Machines: These are ideal for tasks that require a singular focus. They are simpler and are often used for specialized tasks or smaller production runs. Multi-spindle Machines: For large-scale production, multi-spindle machines are the go-to choice. Multi Spindle can handle multiple tasks simultaneously, leading to increased productivity and efficiency. Benefits of Using SPM Tapping Machines Enhanced Productivity: With features like multi-tapping and high-speed operations, these machines can drastically reduce production time. Consistent Quality: The precision offered by Servo controls ensures that every product meets the desired standards. Versatility: From single-spindle to multi-spindle, from high-speed to automatic, there's an SPM Tapping Machine for every need. Energy Efficiency: Servo-driven operations mean that the machine consumes power only when required, leading to significant energy savings.

Spm Drilling Machine | iyalia This is a High Speed Drilling Machine, this machines are used for mass production, as cutting speed and the numberof tools are in multiple, so the production is also multipled. we can customise Drilling machines with Multi Heads as per the requirement

Tube End Facing And Chamfering Machine| iyalia Facing and Chamfering machine for Tubes, we do Special purpose multi purpose industrial automation. This machine is Double side Facing and Chamfering machine, We also make Single side Facing and Chamfering machine. Customised single side facing andChamfering can be made as per the customer requirement. Customized machine and spm machine for facing and chamfering machine. Facing and Centering Machine is used to for small Tube components in length and also with different dia. Machine capacity is normally for small tubes. components made out of Ferrous and Non Ferrous materials. Length of the component can vary from one size to other. These machines can run for round the clock.

Rotary Table Multi Spindle Tapping Machine | Iyalia Rotary Transfer Drilling and Tapping machine for all small components The heat Sink Drilling and Tapping machine are designed and manufactured for high volume production of Heat Sinks and similar components. Many types of Aluminium Heat sink are widely used in industries, which usually requires Drilling and Tapping for fixing. This Heat Sink Drilling and Tapping machine doses four components at a time. It has four stations, and each station is in continuous operation; 1st station is loading parts manually, 2nd station, Drilling in the heat sink, 3rd the station, Tapping—the 4th station, component ejection and Cleaning the fixture for the next component clamping. Please get in touch with us for such a Drilling and Tapping machine or for some other similar machine requirements; thanks for watching the video, and share it if you think it

Banjo Bolt Fully Automatic Drilling SPM| Iyalia We Iyalia Engineering manufactured Banjo Bolt Fully Automatic Drilling SPM Machine. Machine operating will be Fully Automatic operated machine. Drilling with 4 spindle SPM RPM. Rotary will have 8 stations. All the operations are done automatically with Servo controls for depth and Spindle RPM can be adjusted as per the requirement.

Heavy Drilling Machine | Iyalia Introducing the TwinDrill Pro-50 Advantages Drastically Reduced Cycle Time Completes drilling tasks in a fraction of the time compared to CNC lathe operations. Increased Productivity Ability to process two components at once maximizes output on the shop floor. Lower Labor Requirements Automated drilling process allows personnel to focus on other high-value tasks. Enhanced Profitability Quicker job turnarounds improve customer satisfaction and open doors for new business. Reliable and Durable Built to withstand rigorous industrial operations for long-term performance. The TwinDrill Pro-50 is a groundbreaking dual-spindle U-drilling machine meticulously designed to reduce pre-drilling time for components that require large-diameter bores significantly. This robust system, engineered to handle drilling diameters of up to 50mm in a single pass, features two independent spindles, each equipped with its motor. This innovative design enables simultaneous drilling on two parts, drastically enhancing productivity. Origin and Performance The TwinDrill Pro-50 was initially developed in response to a customer challenge involving lengthy pre-drilling cycles on a 76mm diameter part. With its advanced capabilities, this machine completes a 50mm diameter drill to a depth of 110mm in just 80 seconds total—equating to a mere 40 seconds per part! By significantly shortening cycle times, the TwinDrill Pro-50 cuts costs and conserves valuable manpower resources. Its swift return on investment (ROI) and flexible setup make it an essential addition to any workshop aiming to transform its drilling operations.