'part automatically'

Our Hydraulic Press Automation System is a fully integrated solution designed for efficient, high-volume production. It features a 50 Ton four-pillar hydraulic press with robust cylinders, a heavy-duty base plate, and hydraulic system. The bulk loading feeder can hold approximately 50 to 100 kg of metal parts and is supported by a fabricated stand. A step feeder system with 2 to 3 hydraulic-driven feeders ensures smooth material flow, while the loading and unloading station enables quick setup changes (within 5–10 minutes), with components automatically unloaded via a chute and stacked linearly. The system includes a bowl feeder with drive and is designed for fully automated operation, moving components through a linear path with precision and consistency—ideal for improving productivity and reducing manual handling.

Our Hydraulic Press Automation System is a fully integrated solution designed for efficient, high-volume production. It features a 50 Ton four-pillar hydraulic press with robust cylinders, a heavy-duty base plate, and hydraulic system. The bulk loading feeder can hold approximately 50 to 100 kg of metal parts and is supported by a fabricated stand. A step feeder system with 2 to 3 hydraulic-driven feeders ensures smooth material flow, while the loading and unloading station enables quick setup changes (within 5–10 minutes), with components automatically unloaded via a chute and stacked linearly. The system includes a bowl feeder with drive and is designed for fully automated operation, moving components through a linear path with precision and consistency—ideal for improving productivity and reducing manual handling.

Heat Sink Assembly Machine Welcome to Iyalia engineering. This is Heat sink assembly machine with I C. We need to put all part automatically including screwing it. Only I C has to be fed manually, because its a dedicated part and can be damaged. Heat sink and the Screws are fed from Bowl Feeder. First one screw is assembled and then Conductive material is applied. IC is placed manually and once again both the screws are tightened. Then the finished Heat sink is taken out of machine.

Foundry Chaplet Making Machine | Iyalia Welcome to Illaya Engineering. You are going to witness the Illaya Chaplet manufacturing machine. FIRST of its KIND. Innovation towards making Chappet machines. Illaya Chaplet-making machine has six stations of rotary table machines. 1st station, the wire length is defined and will be cut; it will be shifted through pneumatic systems. The 2nd station on the bottom sheet will be cut to length and turned to the fixture. In the 3rd station, the top plate will be cut and moved to the fixture. In the 4th station, all the parts will be aligned together. In the 5th station, the hydraulic press will rivet the Chaplet firmly and finish the part. 6th station, the part will be removed from the machine. This is a fully automatic Chaplet-making machine. You can change the dies as per the size and shape. No skilled manpower is required for parts; once the setting is done, all the parts will be manufactured automatically. Please share this video with your business associates who might be using or making chaplets. Thanks, and happy days ahead.

Automatic Insert Tapping Machine | Iyalia We are the Automatic Nut Tapping machine Manufacturer in INDIA, this is a mould insert, nuts, small parts tapping machine. This is Vertical Nut tapping machine, with a capacity of making 1200 parts per hour, is a specialized machine tool designed for tapping threads. A mould insert is a component used in injection moulding, which a metal insert made out of metal part for injecting material into a mould cavity. The MOuld insert tapping machine can be a dedicating tappingmachine with a cycle time of 1200 parts per hour manufacturing. The tap size can be from M2 to M10 size, the mcahine runs in a vertical coloumn and the head moves vertically in a LM guideways with a Ball screw in it. The complete system run in the Servo control system, the spindle motor and also the machine Slide motor, both are Servo controlled with a PLC controller. In the injection moulding process, the mould insert is often made of hardened steel and contains the cavity into which the material is injected. The mould insert tapping machine is used to create threaded holes in the mould insert to allow for the insertion of screws or other fasteners that hold the mould components together. The machine typically consists of a tapping head that is mounted on a spindle and driven by a motor. The mould insert is clamped in place on a fixture, and the tapping head is brought into position over the insert. The spindle is then rotated, and the tapping head cuts threads into the insert. Mould insert tapping machines are typically used in high-volume production environments where speed and accuracy are critical. They are often used in the automotive and electronics industries, where tight tolerances and high precision are required.High Speed Nut Tapping machine used to make automobile parts, hydraulic nuts, pneumatic nuts, nuts for almost all the industries. This Tapping machine is manufactured in Coimbatore India.This machine works fully automatically for tapping.Here we can achieve 3 to 4 seconds cycle time per componentWe also manufacture Multi spindle Drilling head and Multi spindle Tapping Head for Automatic Tapping Machine. The machine works with Servo Technology, so the machine working is very fast. We are one of the leading Tapping Machine Manufacturers in theworld.

8 Spindle Tapping Machine | Iyalia 8-spindle tapping machine, an automatic tapping system with auto ejection of components into a bin. This is a customized tapping machine designed for high-volume production. An unskilled operator manually loads the parts, the rotary table rotates, and a cylinder pushes the parts into position where tapping is done automatically. The next stage is an idle stage. In the 4th stage, the part is pushed with pneumatic pressure, and the fixture is cleaned and prepared for the next part loading. This cycle takes less than 8 seconds, with each hole taking approximately 1 second. This part is used in car door locks.

SPM Spring Bending Machine Double torsion spring tines for agricultural machinery. Spring Tine Cultivators are generally used to stir and crumble the soil, mixing it up to help both crops grow and remove weeds. They work well on all grass areas that require maintenance, particularly with hard and dried soil surfaces. Keep your Rhodes in tune and singing with tine springs! These springs are found on the tines themselves. It is used to tune a tine to an exact pitch. By pushing the spring forward or backwards, you can vary the pitch of the tine.

Breather Hole Punching SPM Fully Automatic Air Brake Chamber Breather Hole Punching Machine Description:Step into the future of manufacturing with our cutting-edge Air Brake Chamber Breather Hole Punching Machine. Designed with the latest technology, this fully automatic machine revolutionizes the process of punching holes from the inside, ensuring precision and efficiency like never before. With its advanced capabilities, our machine requires minimal operator intervention, making production smoother and more streamlined. From fixing components to automatic punching and rotating, the machine seamlessly handles every step, saving time and reducing errors. Thanks to the machine's versatile design, even parts requiring holes in two different planes are effortlessly accommodated. Setting up a new part is simple and quick, with a user-friendly interface allowing easy configuration through pre-programmed settings. Experience unparalleled productivity and reliability in your manufacturing process with our Air Brake Chamber Breather Hole Punching Machine. Explore the future of manufacturing today.

U Drill Machine Why TwinDrill Pro 50 Outperforms CNC U Drilling Manufacturers rely on U Drills for high-speed precision, but when used in CNC lathes, they often face longer cycle times, increased machine wear, and production bottlenecks. �� The Problem A customer needed to U Drill a 76mm part with a 50mm hole to a depth of 110mm. Using a CNC lathe, the process took 150+ seconds per part—slowing down production and reducing CNC accuracy over time. ✅ The TwinDrill Pro 50 Solution With our dual-spindle Servo U Drilling Machine with Hydraulic Clamping, we completed the same part in just 84 seconds (42 seconds per part)—a 72% time reduction! �� Key Benefits �� Faster Production: Cuts cycle time by 72%, increasing output. �� Less CNC Wear: Frees up CNC lathes for precision tasks, extending their lifespan. �� Cost Savings: Lower energy, tooling, and maintenance costs. �� Why settle for slow CNC drilling? Optimize your workflow with TwinDrill Pro 50. Request a demo today! �� U Drilling Machine Advantages vs. Conventional Drilling Systems Faster Drilling Cycle: Achieve shorter cycle times by drilling large diameters (up to 50mm) in a single pass. Dual-Spindle Efficiency: Process two parts simultaneously, effectively doubling productivity and reducing total machining hours. Reduced Labor Costs: Automated operations minimize manual intervention, freeing up skilled labor for higher-value tasks. Lower Tool Wear: Optimized cutting conditions and superior chip evacuation help extend tool life, lowering replacement costs. Consistent Accuracy: Rigid construction and advanced engineering ensure precise, repeatable bore quality. Quick ROI: Higher throughput and minimal downtime deliver faster return on your machinery investment.