Micro Screw Making Jewellery Machine This is a micro screw-making machine; this screw is used in Jewellery for earing lock and studs screw. This screw can be left hand and right hand. 8mm thread and 4 mm straight. You can change the thread length and the total length also in the jewellery screw. A servo control system and pneumatic slides for length control the complete machine. A cage will be provided to place the wire bunch. To set the wire, make sure the wire must be inserted into the machine for the first setting. The total length can be changed to any size. To change the thread size, you need to change the die. The complete machine runs in a closed cage, so no gold dust or scrape is escaped from the machine. The finished golden screws are collected in the bottom of the machine with a small bin. PLC controls the machine, and the operator panel is there with HMI. This machine can produce screws from 14 or 18, or 22 carrot gold screws

Automatic Tapping Machine| This is High Speed Tapping machine with Cycle time of 3 sceonds for 10mm Thick Through tapping component. Automatic loading and unloading Hydraulic Clamping of component Head movement with servo controls this is high speed dedicated tapping machine for mass production.

Industrial Automation High Speed Bar Feeder Machine We are offering Bar Feeder Machine. This is used in Press shop for feeding bars for initial cutting of the input components. The bar feeding has the capacity of 6mm to 35mm dia and upto 20 feet length. No need of operator in the machine

Shaft Rotor Shaft Assembly Shaft & Rotor Assembly machine This new semi-automatic machine will be used for Pressing the shaft into rotor as per requirement and spot facing, center drilling, drilling, reaming, cleaning the hole and pin pressing into hole the process sequence of this requirement • Shaft pressing into Rotor – The operator loads the rotor and shaft, and after part detection, pressing begins, with load confirmation displayed. • Shaft rotor height checking gauge – The operator checks the part's height, and the machine confirms with a green light. • Part loading at SPM – The operator loads the part, and after orientation and mix-up checks, the machine indexes to the next station. • Spot facing Operation – The tool performs spot facing under servo control, coolant is applied, and a sensor checks tool condition. • Center Drilling Operation – The center drilling tool operates under servo control, with coolant applied and tool condition monitored. • Drilling Operation – Drilling is servo-controlled with coolant, and a sensor checks tool condition after each cycle. • Reaming Operation – Reaming is servo-controlled with coolant, and tool condition is checked by a sensor after each cycle. • Cleaning of hole – Air pipes clean the reamed hole by blowing out chips and coolant. • Pin Pressing – The pin is pressed into the hole, with load monitoring, and the part moves to the next station after confirmation. • Pin height checking and unloading – Pin height is checked, and the part is unloaded using a pneumatic magnet after confirmation.

Multi SpindleTapping Machine We are leading manufacturer of tapping machine for single head tapping machine, multi head tapping machine. we are provided good quality of raw material used in this all type of special purpose machines. What is an SPM Tapping Machine?SPM, or Special Purpose Machines, are designed for specific tasks, offering a level of specialization that general machines can't match. The SPM Tapping Machine, as the name suggests, is designed for tapping – a process where internal threads are cut into a hole. These machines can range from single-spindle versions to multi-spindle ones, catering to different production needs. The Power of Servo Controls One of the standout features of our SPM Tapping Machines is the integration of Servo controls. But why is this significant? Precision: Servo controls offer unparalleled precision. The ability to control the machine's speed and position ensures that every tap is consistent and accurate. Flexibility: With Servo controls, operators can easily adjust the machine's parameters, allowing for a wide range of tapping requirements. Efficiency: Servo-driven machines consume power only when needed, leading to energy savings. Types of SPM Tapping Machines High-Speed Tapping Machines: As the name suggests, these machines are designed for operations that require rapid tapping. They are ideal for large-scale production where time is of the essence. Automatic Tapping Machines: These machines are designed for automated operations. Once set, they can operate without much human intervention, ensuring consistent results and high productivity. Multi-hole with Single Components for Multi-tapping: This is a versatile machine designed for multi-tapping tasks. It can tap multiple holes in a single component simultaneously, drastically reducing production time. Single-spindle vs. Multi-spindle Tapping Machines Single-spindle Machines: These are ideal for tasks that require a singular focus. They are simpler and are often used for specialized tasks or smaller production runs. Multi-spindle Machines: For large-scale production, multi-spindle machines are the go-to choice. Multi Spindle can handle multiple tasks simultaneously, leading to increased productivity and efficiency. Benefits of Using SPM Tapping Machines Enhanced Productivity: With features like multi-tapping and high-speed operations, these machines can drastically reduce production time. Consistent Quality: The precision offered by Servo controls ensures that every product meets the desired standards. Versatility: From single-spindle to multi-spindle, from high-speed to automatic, there's an SPM Tapping Machine for every need. Energy Efficiency: Servo-driven operations mean that the machine consumes power only when required, leading to significant energy savings.

Tube End Facing And Chamfering Machine| iyalia Facing and Chamfering machine for Tubes, we do Special purpose multi purpose industrial automation. This machine is Double side Facing and Chamfering machine, We also make Single side Facing and Chamfering machine. Customised single side facing andChamfering can be made as per the customer requirement. Customized machine and spm machine for facing and chamfering machine. Facing and Centering Machine is used to for small Tube components in length and also with different dia. Machine capacity is normally for small tubes. components made out of Ferrous and Non Ferrous materials. Length of the component can vary from one size to other. These machines can run for round the clock.

Drilling Tapping Machine| Iyalia Iyalia Drilling and Tapping Machine: Elevate Production 4X with Advanced SPM Drilling Looking to supercharge your Drilling Tapping processes? The Iyalia Drilling and Tapping Machine is your clear choice. Engineered as a high-performance Multi Drilling Tapping machine, it delivers production rates up to four times faster than standard drilling machines—while maintaining impeccable precision. From overcoming manpower challenges to maximizing ROI, Iyalia has you covered. Faster Production, Consistent Quality Speed is king in modern manufacturing. This SPM Drilling solution automates repetitive tasks, slashes cycle times, and ensures uniform holes and threads. You’ll eliminate production bottlenecks, meet urgent deadlines, and guarantee unwavering quality in every piece—essential for building a reputation of excellence in today’s competitive market. Overcome Manpower Challenges Worried about labor shortages or high turnover? By integrating this Multi Drilling machine, you reduce the strain on human resources. The intuitive interface requires minimal training, and automated functions lower manual intervention. Your team stays focused on strategic, high-value activities while enjoying a safer, more efficient work environment. Maximize ROI, Minimize Costs Investing in the Iyalia Drilling and Tapping Machine translates into tangible financial gains. With 4X faster Drilling Tapping output, you boost your throughput without adding extra shifts or personnel. Less downtime and durable components keep maintenance costs low, while improved accuracy cuts material waste. The result? A quicker path to breaking even and a robust return on investment. Scalable, Future-Ready Design Manufacturing demands shift fast. The Iyalia machine’s modular construction makes it adaptable—perfect for new materials or evolving product lines. Seamlessly integrate it with existing processes for higher-volume production, or upgrade its capabilities to match new market trends. You’ll stay agile and maintain a competitive edge. Why Choose the Iyalia Multi Drilling Tapping Machine? 4X higher throughput than standard drilling systems Precise SPM Drilling for consistently accurate holes and threads User-friendly controls that streamline training Reduced reliance on manual labor, boosting safety and morale Proven ROI with faster production and minimal downtime Ready to Transform Your Production? Celebrate the power of advanced Drilling Tapping technology and take your operations to unprecedented levels of efficiency. Contact us today to discover how the Iyalia Drilling and Tapping Machine—your trusted Multi Drilling machine—delivers game-changing performance, cuts overhead, and positions you for success in a rapidly evolving industry.

Submersible Pump Shaft Key way Milling Machine | Iyalia We, Iyalia, are located in Coimbatore, HUB of Submersible Pump Manufacturing. We accepted a "MAKING THEIR LIFE EASIER" challenge by designing a machine for Keyway Milling Submersible PUMP CENTRE Shafts where quality is 100% and ZERO Rejection. Centre Shaft has Two Keyways on 180Deg of shaft width from 3 mm and goes on as per the shaft Dia. The Shaft Dia and the length can vary from 300 to 3000mm. Production must be quick and consistent, without any significant human resources involved. Production output will be 700 to 1000 mm/minute. with the minimum workforce.

4 Spindle CNC Lathe Vertical| Iyalia 4 hydraulic chuck fixed in 4 spindle cnc lathe vertical lathe. 4 hydraulic chucks cnc controls fanuc hydraulic chuck dia 135mm cd between chucks 200 mm spindle rpm 1500 linear toolings vtl cnc are used to machine heavy products individually and are with single chuck with 1 set of linear tooling. iyalia customized vtl / lathe-cnc- machine haves 4 hydraulic chucks dia 135 and 4 sets of linear tooling’s with a capacity of dia 160 mm, where 4 parts will be machined at a time, which results 4 times production in one cycle. It can do turning, boring, facing and grooving and also threading. Iyalia vtl can perform all the linear tooling’s operations and you can give individual offset to each tool mechanically, which is the highlight of this machine. Products like flanges, sleeves, cups or first operation can be done with a high productivity. It can be used in forging and casting industries where many products are made in high volumes. The Iyalia Vertical CNC is not just a machine; it's a solution. It's designed for industries that require high-volume production, such as the fAluminium and Soft material turning with open tolerances. Products like flanges, sleeves, and cups can be produced with high efficiency. The machine's versatility makes it ideal for first operations, ensuring that products are made to exact specifications every time.