Heat Sink Assembly Machine Welcome to Iyalia engineering. This is Heat sink assembly machine with I C. We need to put all part automatically including screwing it. Only I C has to be fed manually, because its a dedicated part and can be damaged. Heat sink and the Screws are fed from Bowl Feeder. First one screw is assembled and then Conductive material is applied. IC is placed manually and once again both the screws are tightened. Then the finished Heat sink is taken out of machine.

Rotary Table Multi Spindle Tapping Machine | Iyalia Rotary Transfer Drilling and Tapping machine for all small components The heat Sink Drilling and Tapping machine are designed and manufactured for high volume production of Heat Sinks and similar components. Many types of Aluminium Heat sink are widely used in industries, which usually requires Drilling and Tapping for fixing. This Heat Sink Drilling and Tapping machine doses four components at a time. It has four stations, and each station is in continuous operation; 1st station is loading parts manually, 2nd station, Drilling in the heat sink, 3rd the station, Tapping—the 4th station, component ejection and Cleaning the fixture for the next component clamping. Please get in touch with us for such a Drilling and Tapping machine or for some other similar machine requirements; thanks for watching the video, and share it if you think it

Circular Saw Cutting Machine | Iyalia A Circular Saw Cutting Machine is used to cut steel bars, Alloy Bars into the desired lengths. The machine consists of a Circular Saw blade that rotates at Speeds and is powered by a gearbox connected to an electric motor. The steel bars are placed on a bed, clamping is done from vertical and Horizontal Direction, and the saw blade cuts through the steel as it is fed through the machine. Circular saw machines are commonly used in manufacturing industries for cutting steel bars, pipes, and other materials. They are used to cut steel bars to size for cutting steel bars for use in manufacturing machinery and equipment of any size. These machines can cut steel bars with precision and speed and handle a wide range of bar sizes and thicknesses. Some machines have an automatic feed system that allows for continuous cutting. In contrast, others may have a manual feed system that requires the operator to feed the steel bar into the saw. Some machines also have a saw blade height adjustment feature to accommodate different thicknesses of steel bars. It is important to note that while cutting steel bars with circular saw machines may be fast and efficient, it is also essential to follow safety procedures and use appropriate personal protective equipment to avoid injuries.

8 Spindle Tapping Machine | Iyalia 8-spindle tapping machine, an automatic tapping system with auto ejection of components into a bin. This is a customized tapping machine designed for high-volume production. An unskilled operator manually loads the parts, the rotary table rotates, and a cylinder pushes the parts into position where tapping is done automatically. The next stage is an idle stage. In the 4th stage, the part is pushed with pneumatic pressure, and the fixture is cleaned and prepared for the next part loading. This cycle takes less than 8 seconds, with each hole taking approximately 1 second. This part is used in car door locks.