'applied ic'

Our Hydraulic Press Automation System is a fully integrated solution designed for efficient, high-volume production. It features a 50 Ton four-pillar hydraulic press with robust cylinders, a heavy-duty base plate, and hydraulic system. The bulk loading feeder can hold approximately 50 to 100 kg of metal parts and is supported by a fabricated stand. A step feeder system with 2 to 3 hydraulic-driven feeders ensures smooth material flow, while the loading and unloading station enables quick setup changes (within 5–10 minutes), with components automatically unloaded via a chute and stacked linearly. The system includes a bowl feeder with drive and is designed for fully automated operation, moving components through a linear path with precision and consistency—ideal for improving productivity and reducing manual handling.

Our Hydraulic Press Automation System is a fully integrated solution designed for efficient, high-volume production. It features a 50 Ton four-pillar hydraulic press with robust cylinders, a heavy-duty base plate, and hydraulic system. The bulk loading feeder can hold approximately 50 to 100 kg of metal parts and is supported by a fabricated stand. A step feeder system with 2 to 3 hydraulic-driven feeders ensures smooth material flow, while the loading and unloading station enables quick setup changes (within 5–10 minutes), with components automatically unloaded via a chute and stacked linearly. The system includes a bowl feeder with drive and is designed for fully automated operation, moving components through a linear path with precision and consistency—ideal for improving productivity and reducing manual handling.

Automatic Tapping Machine| This is High Speed Tapping machine with Cycle time of 3 sceonds for 10mm Thick Through tapping component. Automatic loading and unloading Hydraulic Clamping of component Head movement with servo controls this is high speed dedicated tapping machine for mass production.

Heat Sink Assembly Machine Welcome to Iyalia engineering. This is Heat sink assembly machine with I C. We need to put all part automatically including screwing it. Only I C has to be fed manually, because its a dedicated part and can be damaged. Heat sink and the Screws are fed from Bowl Feeder. First one screw is assembled and then Conductive material is applied. IC is placed manually and once again both the screws are tightened. Then the finished Heat sink is taken out of machine.

SPM Tube End Thickening Machine A Tube-expanding hydraulic Press with two cylinders is a specialized Machine designed for the R and D of the TATA Group. The purpose of this machine is to expand the ends of tubes from INSIDE; this is a special customized requirement. Two cylinders operate by applying hydraulic force to expand the diameter of the tube's end. It features two high-pressure hydraulic cylinders that work in tandem to exert uniform pressure on the tube, causing it to expand radially. One of the key features of this machine is its customization. It can be tailored to meet the specific needs of various industries and applications. This customization may include adjustments to the tube diameter range, The Tube Expanding Hydraulic Press incorporates safety features such as emergency stop buttons, protective guards, and pressure relief valves to ensure the well-being of operators and the longevity of the equipment.

Shaft Rotor Shaft Assembly Shaft & Rotor Assembly machine This new semi-automatic machine will be used for Pressing the shaft into rotor as per requirement and spot facing, center drilling, drilling, reaming, cleaning the hole and pin pressing into hole the process sequence of this requirement • Shaft pressing into Rotor – The operator loads the rotor and shaft, and after part detection, pressing begins, with load confirmation displayed. • Shaft rotor height checking gauge – The operator checks the part's height, and the machine confirms with a green light. • Part loading at SPM – The operator loads the part, and after orientation and mix-up checks, the machine indexes to the next station. • Spot facing Operation – The tool performs spot facing under servo control, coolant is applied, and a sensor checks tool condition. • Center Drilling Operation – The center drilling tool operates under servo control, with coolant applied and tool condition monitored. • Drilling Operation – Drilling is servo-controlled with coolant, and a sensor checks tool condition after each cycle. • Reaming Operation – Reaming is servo-controlled with coolant, and tool condition is checked by a sensor after each cycle. • Cleaning of hole – Air pipes clean the reamed hole by blowing out chips and coolant. • Pin Pressing – The pin is pressed into the hole, with load monitoring, and the part moves to the next station after confirmation. • Pin height checking and unloading – Pin height is checked, and the part is unloaded using a pneumatic magnet after confirmation.

Micro Screw Making Jewellery Machine This is a micro screw-making machine; this screw is used in Jewellery for earing lock and studs screw. This screw can be left hand and right hand. 8mm thread and 4 mm straight. You can change the thread length and the total length also in the jewellery screw. A servo control system and pneumatic slides for length control the complete machine. A cage will be provided to place the wire bunch. To set the wire, make sure the wire must be inserted into the machine for the first setting. The total length can be changed to any size. To change the thread size, you need to change the die. The complete machine runs in a closed cage, so no gold dust or scrape is escaped from the machine. The finished golden screws are collected in the bottom of the machine with a small bin. PLC controls the machine, and the operator panel is there with HMI. This machine can produce screws from 14 or 18, or 22 carrot gold screws

Automatic High Speed Tapping Machine | Multi Spindle Tapping machine for Blanking component with M-12 tapping size. tapping normally done individually, whereas in some case the operator miss the tapping operation and the component goes without tapping. In Multi Tapping head the missing operation is always 100% without any issue

4 Spindle CNC Lathe Vertical| Iyalia 4 hydraulic chuck fixed in 4 spindle cnc lathe vertical lathe. 4 hydraulic chucks cnc controls fanuc hydraulic chuck dia 135mm cd between chucks 200 mm spindle rpm 1500 linear toolings vtl cnc are used to machine heavy products individually and are with single chuck with 1 set of linear tooling. iyalia customized vtl / lathe-cnc- machine haves 4 hydraulic chucks dia 135 and 4 sets of linear tooling’s with a capacity of dia 160 mm, where 4 parts will be machined at a time, which results 4 times production in one cycle. It can do turning, boring, facing and grooving and also threading. Iyalia vtl can perform all the linear tooling’s operations and you can give individual offset to each tool mechanically, which is the highlight of this machine. Products like flanges, sleeves, cups or first operation can be done with a high productivity. It can be used in forging and casting industries where many products are made in high volumes. The Iyalia Vertical CNC is not just a machine; it's a solution. It's designed for industries that require high-volume production, such as the fAluminium and Soft material turning with open tolerances. Products like flanges, sleeves, and cups can be produced with high efficiency. The machine's versatility makes it ideal for first operations, ensuring that products are made to exact specifications every time.