Submersible Pump Shaft Keyway Milling Machine The ...

Submersible Pump Shaft Keyway Milling Machine 

The submersible pump's Centre Shaft plays a vital role from top to bottom, which revolves around the various stages. The pump shaft keeps the Submersible pump working from top to bottom.

The Submersible Pump Shaft material is very carefully selected as this plays a significant role in the pump. The material selection and the process play the primary role in working the Submersible pump. 

The keyway milling in the PUMP shaft is done in a keyway milling machine where the shaft is fixed in the Milling machine, and the cutter comes from one side to the other, cutting the single side key in the shaft.

The first side of the shaft key is done, and to the machine keyway second side, the same part is now fixed and rotated 180Deg in the Milling Machine. The same process of keyway milling is done in the pump shaft and finished.

There are many challenges faced after the Keyway of the shaft. The keyways are processed in 2 different settings; the following difficulties are noticed. 

• The keyways are not straight sometimes.

• The Pump Keyway is up and down 

• Keyway sizes and parallelism are also the same from one of the Submersible Pump centre shafts to the other. 

• Rejections and reworks are more.

The raw material cost is much more than the operation process cost. 

Iyalia Pump Centre Shaft Keyway milling machine 

Iyalia Submersible Pump Keyway Milling machine eliminates all these challenges. The pump Keyway milling machine produces 100% good pars within the tolerance and without any obstacles and will make life easier for all the pump Keyway Shaft manufacturers. 

The Keyway machine has two milling heads that dose the process simultaneously, which avoids the challenges mentioned above. This Shaft keyway Milling machine can produce 300 mm to 3000 mm length parts without significant changes done in the machine.

This machine works semi-automatically, and duplex Keyway milling has a 700mm to 1000mm feed rate, giving the machine a top-notch performer.

Ultimately the machine owner will have 4 to 5 times more productive, and the profits will be three to four times higher than a milling machine.